English
 |
| Quantity: | |
|---|---|
1.0 The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).
2.0 The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).
3.0 The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).
4.0 Fault display screen installed on the top of output area.
5.0 Human-machine interface touch screen control method, visible operation mode.
6.0 The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc.
7.0 Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.
8.0 The servo motion controller provide the accurate synchronization control for servo motors.
9.0 Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.
10.0 Automatic remove the waste products during raw materials changing period.
11.0 Automatic three colors & loud sound alarming light.
12.0 The tension power of elastic is adjustable, automatic breakage stopping & alarming.
Technical parameters:
◎ Steady speed : 600PPM
◎ Passing rate : ≥97%
◎ Production efficiency : ≥86%
◎ Installed power : ≈600KW
◎ Equipment dimension : L 45m x W 9m x H 4.5m
◎ Equipment weight : ≈100MT
◎ Working pressure : 0.6 – 0.8 Mpa
◎Power supply : 380V, 50Hz
1.0 The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).
2.0 The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).
3.0 The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).
4.0 Fault display screen installed on the top of output area.
5.0 Human-machine interface touch screen control method, visible operation mode.
6.0 The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc.
7.0 Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.
8.0 The servo motion controller provide the accurate synchronization control for servo motors.
9.0 Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.
10.0 Automatic remove the waste products during raw materials changing period.
11.0 Automatic three colors & loud sound alarming light.
12.0 The tension power of elastic is adjustable, automatic breakage stopping & alarming.
Technical parameters:
◎ Steady speed : 600PPM
◎ Passing rate : ≥97%
◎ Production efficiency : ≥86%
◎ Installed power : ≈600KW
◎ Equipment dimension : L 45m x W 9m x H 4.5m
◎ Equipment weight : ≈100MT
◎ Working pressure : 0.6 – 0.8 Mpa
◎Power supply : 380V, 50Hz
