English
 |
| Quantity: | |
|---|---|
Main functions and features:
1.0 The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).
2.0 The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).
3.0 The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).
4.0 The tension power of elastic is adjustable, automatic breakage stopping & alarming.
5.0 Automatic remove the waste products during raw materials changing period.
6.0 The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc.
7.0 Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.
8.0 The servo motion controller provide the accurate synchronization control for servo motors.
9.0 Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.
10.0 Human-machine interface touch screen control method, visible operation mode.
11.0 Automatic three colors & loud sound alarming light.
12.0 Fault display screen installed on the top of output area.
Technical parameters:
◎ Steady speed : 600~800PPM
◎ Installed power : ≈450KW
◎Power supply : 380V, 50Hz
◎ Passing rate : ≥97%
◎ Production efficiency : ≥86%
◎ Equipment weight : ≈80MT
◎ Working pressure : 0.6 – 0.8 Mpa
◎ Equipment dimension : L 36m x W 9m x H 4.5m
Main functions and features:
1.0 The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).
2.0 The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).
3.0 The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).
4.0 The tension power of elastic is adjustable, automatic breakage stopping & alarming.
5.0 Automatic remove the waste products during raw materials changing period.
6.0 The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc.
7.0 Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.
8.0 The servo motion controller provide the accurate synchronization control for servo motors.
9.0 Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.
10.0 Human-machine interface touch screen control method, visible operation mode.
11.0 Automatic three colors & loud sound alarming light.
12.0 Fault display screen installed on the top of output area.
Technical parameters:
◎ Steady speed : 600~800PPM
◎ Installed power : ≈450KW
◎Power supply : 380V, 50Hz
◎ Passing rate : ≥97%
◎ Production efficiency : ≥86%
◎ Equipment weight : ≈80MT
◎ Working pressure : 0.6 – 0.8 Mpa
◎ Equipment dimension : L 36m x W 9m x H 4.5m
