info@rchjx.com     +86-15956606887
Home / Products / Others / Diaper Making Machine / China Adult Diaper Machine Maker
Share to:

China Adult Diaper Machine Maker

Working speed 300 PPM 
Efficiency > 86% 
Total Weight ≈100MT
Power source 380V, 50Hz
Passing rate ≥ 97% 
Control Method HMI Touch
Air pressure 0.6-0.8Mpa 
Capacity ≈600KW 
Transmission Mode Full servo motor
Availability:
Quantity:
  • FS-CNK
  • RCH

T shape diaper machine (2)

Ⅰ. Machine name : Full Servo Controlled Adult Diaper Converting Machine

1.0  Mode: FS-CNK-3009

2.0  Basic Technical Parameters:

2.1 Finished product : T-shape diapers(S/M/L/size);

2.2 Products drawing :

Material composition:Leak-proof cuff NW, Top-sheet NW, ADL, Tissue, double cotton cores with SAP, Back sheet, Waist elastic band, Frontal waist tape, Right & left waist tape, Elastic thread, hot melt adhesive etc.

2.3 Design speed : 300PPM

Working speed : 260PPM (M size)

2.4 Wastage : ≤3%

2.5 Efficiency : ≥86%

2.6 Power : 3 phases 380V AC, 50HZ 3ph + N

2.7 Control power : 24V DC

2.8 Installed capacity : about 600KW

2.9 Air compressor capacity : 3m³/min,0.6-0.8Mpa(Prepared by buyer)

2.10     Location dimension : L~45m,W~8m,H~5m (Dust collection & Packing units inside)

2.11     Untreated pulp crusher : 2 units

2.12     Stacker :

2.12.1 Automatic counting and pushing function, but the pushing mechanism need the operator pre-prepare the open bag in the output mouth by hand.

2.12.2 Packing quantity : 10 pcs≤, 20pcs≤.

2.12.3 Bagging mouths : 2

2.12.4 Production speed: ≤15Pakages/min x 2 Output mouths

2.12.5 Compression ratio: ≤70%

2.13     Machine direction : Customizable

2.14     Machine color : Customizable

2.15     Safety measures:

2.15.1 Safety ID according to CE standard.

2.15.2 All electronic elements certified by 3C, UL or CE.

2.15.3 Anti-shock & anti-lightning.

2.15.4 Safety protection shield.

2.15.5 Potentially dangerous parts (such as cutting unit, blades, etc.) are equipped with safety measures, and are marked with warning signs and safety ID.

2.15.6 The machine is equipped with an emergency braking device, press it to stop the operation of the equipment immediately.

2.15.7 Each power supply circuit and control circuit are relatively independent. If a circuit fails, it will not affect other circuits.

2.15.8 Each circuit has air switch and relay protection measures, motor has over heat & over load protection.

2.15.9 Alarming system (sound and light alarming).

2.15.10 Machine start has automatic alarming process to remind workers.

Ⅱ. Automation :

1.0  Japan Mitsubishi full series servo shaft-less transmission & control system.

2.0  The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).

3.0  The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).

4.0  The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).

5.0  The tension power of elastic is adjustable, automatic breakage stopping & alarming.

6.0  Automatic remove the waste products during raw materials changing period.

7.0  The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc..

8.0  Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.

9.0  The servo motion controller provide the accurate synchronization control for servo motors.

10.0  Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.

11.0  Human-machine interface touch screen control method, visible operation mode.

12.0  Automatic three colors & loud sound alarming light.

13.0  Fault display screen installed on the top of output area.


Main functions and features:

◎ Adult diaper converting machine

◎ Flexible, modular design, easy to upgrade and reform in future

◎ Suitable for three sizes products: M/L/XL

◎ Pulp & SAP mixed absorbent core

◎ Precise SAP feeding

◎ PLC + touch screen (HMI interface)

◎ Spot detection system, image detection system & metal detection system

◎ Easy maintenance: remote maintenance by electric programs

◎ Automatic stacker or automatic packer (optional)

◎ Dust collector (optional)

Technical parameters:

◎ Steady speed : 300PPM

◎ Passing rate : ≥97%

◎ Production efficiency : ≥86%

◎ Installed power : ≈600KW

◎ Equipment dimension : L 45m x W 9m x H 4.5m

◎ Equipment weight : ≈100MT

◎ Working pressure : 0.6 – 0.8 Mpa

◎Power supply : 380V, 50Hz


RCH, focus on R&D and manufacturing, your reliable hygiene products machinery partner.
Contact Us
   C6, Yongfeng Industrial Park, Dadukou Town, Dongzhi County, Anhui Province
  info@rchjx.com
  +86-0566-2552666  
+86-15956606887
OUR MACHINES

Quick Links

  
Copyright © 2021Anhui RCH Machinery Co., Ltd. All Rights Reserved . Technology by Leadong   Sitemap   ICP2020018541-2