English
 |
| Quantity: | |
|---|---|
Ⅰ. Machine name : Adult diaper manufacturing line /Adult diaper producing line / Adult diaper production line
1.0 Mode: FS-CNK-3009
2.0 Basic Technical Parameters:
2.1 Finished product : T-shape diapers（S/M/L/size）；
2.2 Products drawing :
Material composition：Leak-proof cuff NW, Top-sheet NW, ADL, Tissue, double cotton cores with SAP, Back sheet, Waist elastic band, Frontal waist tape, Right & left waist tape, Elastic thread, hot melt adhesive etc.
2.3 Design speed : 300PPM
Working speed : 260PPM (M size)
2.4 Wastage : ≤3%
2.5 Efficiency : ≥86%
2.6 Power : 3 phases 380V AC, 50HZ 3ph + N
2.7 Control power : 24V DC
2.8 Installed capacity : about 600KW
2.9 Air compressor capacity : 3m³/min，0.6-0.8Mpa（Prepared by buyer）
2.10 Location dimension : L~45m，W~8m，H~5m (Dust collection & Packing units inside)
2.11 Untreated pulp crusher : 2 units
2.12 Stacker :
2.12.1 Automatic counting and pushing function, but the pushing mechanism need the operator pre-prepare the open bag in the output mouth by hand.
2.12.2 Packing quantity : 10 pcs≤, 20pcs≤.
2.12.3 Bagging mouths : 2
2.12.4 Production speed: ≤15Pakages/min x 2 Output mouths
2.12.5 Compression ratio: ≤70%
2.13 Machine direction : Customizable
2.14 Machine color : Customizable
2.15 Safety measures:
2.15.1 Safety ID according to CE standard.
2.15.2 All electronic elements certified by 3C, UL or CE.
2.15.3 Anti-shock & anti-lightning.
2.15.4 Safety protection shield.
2.15.5 Potentially dangerous parts (such as cutting unit, blades, etc.) are equipped with safety measures, and are marked with warning signs and safety ID.
2.15.6 The machine is equipped with an emergency braking device, press it to stop the operation of the equipment immediately.
2.15.7 Each power supply circuit and control circuit are relatively independent. If a circuit fails, it will not affect other circuits.
2.15.8 Each circuit has air switch and relay protection measures, motor has over heat & over load protection.
2.15.9 Alarming system (sound and light alarming).
2.15.10 Machine start has automatic alarming process to remind workers.
Specification | |||||
Adult diaper | Sticker type | Size | M/L/XL | ||
Waist bond type | |||||
Parameters | |||||
Steady speed Passing rate Production efficiency Installed power Equipment dimension Equipment weight Working pressure Power supply | 300PPM ≥97% ≥86% ≈600KW L 45m x W 9m x H 4.5m ≈100MT 0.6 – 0.8 Mpa 380V, 50Hz | ||||
Main functions and features:
◎ Adult diaper converting machine
◎ Flexible, modular design, easy to upgrade and reform in future
◎ PLC + touch screen (HMI interface)
◎ Spot detection system, image detection system & metal detection system
◎ Easy maintenance: remote maintenance by electric programs
◎ Suitable for three sizes products: M/L/XL
◎ Pulp & SAP mixed absorbent core
◎ Precise SAP feeding
◎ Automatic stacker or automatic packer (optional)
◎ Dust collector (optional)
Model:FS-CNK
Place of Orign:Anhui, China
Voltage:380V
Product object: Adult
Product Type: Diaper Converting Machine
Diaper Machine Color:customization
Automatic Grade:Full Servo
Certification:3C,UL or CE
Condition:New
Ⅱ. Automation :
1.0 Japan Mitsubishi full series servo shaft-less transmission & control system.
2.0 The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).
3.0 The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).
4.0 The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).
5.0 The tension power of elastic is adjustable, automatic breakage stopping & alarming.
6.0 Automatic remove the waste products during raw materials changing period.
7.0 The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc..
8.0 Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.
9.0 The servo motion controller provide the accurate synchronization control for servo motors.
10.0 Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.
11.0 Human-machine interface touch screen control method, visible operation mode.
12.0 Automatic three colors & loud sound alarming light.
13.0 Fault display screen installed on the top of output area.
Ⅰ. Machine name : Adult diaper manufacturing line /Adult diaper producing line / Adult diaper production line
1.0 Mode: FS-CNK-3009
2.0 Basic Technical Parameters:
2.1 Finished product : T-shape diapers（S/M/L/size）；
2.2 Products drawing :
Material composition：Leak-proof cuff NW, Top-sheet NW, ADL, Tissue, double cotton cores with SAP, Back sheet, Waist elastic band, Frontal waist tape, Right & left waist tape, Elastic thread, hot melt adhesive etc.
2.3 Design speed : 300PPM
Working speed : 260PPM (M size)
2.4 Wastage : ≤3%
2.5 Efficiency : ≥86%
2.6 Power : 3 phases 380V AC, 50HZ 3ph + N
2.7 Control power : 24V DC
2.8 Installed capacity : about 600KW
2.9 Air compressor capacity : 3m³/min，0.6-0.8Mpa（Prepared by buyer）
2.10 Location dimension : L~45m，W~8m，H~5m (Dust collection & Packing units inside)
2.11 Untreated pulp crusher : 2 units
2.12 Stacker :
2.12.1 Automatic counting and pushing function, but the pushing mechanism need the operator pre-prepare the open bag in the output mouth by hand.
2.12.2 Packing quantity : 10 pcs≤, 20pcs≤.
2.12.3 Bagging mouths : 2
2.12.4 Production speed: ≤15Pakages/min x 2 Output mouths
2.12.5 Compression ratio: ≤70%
2.13 Machine direction : Customizable
2.14 Machine color : Customizable
2.15 Safety measures:
2.15.1 Safety ID according to CE standard.
2.15.2 All electronic elements certified by 3C, UL or CE.
2.15.3 Anti-shock & anti-lightning.
2.15.4 Safety protection shield.
2.15.5 Potentially dangerous parts (such as cutting unit, blades, etc.) are equipped with safety measures, and are marked with warning signs and safety ID.
2.15.6 The machine is equipped with an emergency braking device, press it to stop the operation of the equipment immediately.
2.15.7 Each power supply circuit and control circuit are relatively independent. If a circuit fails, it will not affect other circuits.
2.15.8 Each circuit has air switch and relay protection measures, motor has over heat & over load protection.
2.15.9 Alarming system (sound and light alarming).
2.15.10 Machine start has automatic alarming process to remind workers.
Specification | |||||
Adult diaper | Sticker type | Size | M/L/XL | ||
Waist bond type | |||||
Parameters | |||||
Steady speed Passing rate Production efficiency Installed power Equipment dimension Equipment weight Working pressure Power supply | 300PPM ≥97% ≥86% ≈600KW L 45m x W 9m x H 4.5m ≈100MT 0.6 – 0.8 Mpa 380V, 50Hz | ||||
Main functions and features:
◎ Adult diaper converting machine
◎ Flexible, modular design, easy to upgrade and reform in future
◎ PLC + touch screen (HMI interface)
◎ Spot detection system, image detection system & metal detection system
◎ Easy maintenance: remote maintenance by electric programs
◎ Suitable for three sizes products: M/L/XL
◎ Pulp & SAP mixed absorbent core
◎ Precise SAP feeding
◎ Automatic stacker or automatic packer (optional)
◎ Dust collector (optional)
Model:FS-CNK
Place of Orign:Anhui, China
Voltage:380V
Product object: Adult
Product Type: Diaper Converting Machine
Diaper Machine Color:customization
Automatic Grade:Full Servo
Certification:3C,UL or CE
Condition:New
Ⅱ. Automation :
1.0 Japan Mitsubishi full series servo shaft-less transmission & control system.
2.0 The raw material adopts the central decoiling by constant tension mechanism (except for pulp, Hook and loop fastener, SAP etc).
3.0 The raw material adopts the decoiling method by controlled servo motor, and the single roll use controlled independent motor (except for pulp, Hook and loop fastener etc).
4.0 The raw material adopts the automatic splicing method, (except for pulp, Hook and loop fastener etc).
5.0 The tension power of elastic is adjustable, automatic breakage stopping & alarming.
6.0 Automatic remove the waste products during raw materials changing period.
7.0 The machine has the raw material breakage inspection, the material absence inspection, the raw material automatic splicing inspection, automatic counting functions etc..
8.0 Each motion units take independent servo motor, to enhance the accuracy of transmission and the stability of machine.
9.0 The servo motion controller provide the accurate synchronization control for servo motors.
10.0 Automatic hot melt adhesive spray, automatic stop, support manual control mode changing.
11.0 Human-machine interface touch screen control method, visible operation mode.
12.0 Automatic three colors & loud sound alarming light.
13.0 Fault display screen installed on the top of output area.
